Accessories to assist in the storage, transportation and installation of rolling bearings

The characteristic accessories are used to assist the storage, transportation and installation of rolling bearings at http://www.qdrjzc.com/brand/.html. Handling and installation tools The bearing and installation tool BEARING-MATE, please refer to the table for details, is an easy-to-operate accessory for medium or large rolling bearings. It is also used where the bearing is heated and ready to be installed. This tool consists of two handles and two steel belts. The steel belt is tightly clamped on the outer ring of the bearing. The complete set of tools also includes 2 splints. They can prevent the inner ring from tilting when handling spherical roller bearings and self-aligning ball bearings. This tool and bearing can be carried by two people or by crane. If using a crane, the bearing can be lifted by 2 straps and can be rotated to any desired position. During the heating process, the handling tool can be installed on the bearing all the time. It has the same degree of expansion as the bearing. This tool can be used for bearings weighing up to 500 kg and the maximum operating temperature can reach +160 °C. Tool ordering example. Tools used to transport and install bearings with an outer diameter from 250 mm to 450 mm, using 2 short splints and a pair of gloves GLOVE-PRO-CUT ordering code BEARING-MATE250-450 accessory, splint long splint (2 pieces ) It can prevent the inner ring of the spherical roller bearing from tilting. Order code BEARING-MATE-LOCKBAR270 accessory, 2 straps, 1 m long order code BEARING-MATE.SLING-1M accessory, spare accessory bag, spare accessory bag order code BEARING- MATE.SERVICE-KIT gloves are very suitable for the installation and disassembly of heating bearings or other heating parts. The gloves are shear resistant and durable. The heat-resistant temperature is +150 °C. The heat-resistant glove GLOVE-PRO is heat-resistant up to +150 °C. The order code GLOVE-PRO has a heat-resistant temperature of +200 °C. If high-temperature resistance is the main requirement, the insulated gloves GLOVE-PRO-TEMP can meet the demand. They are multi-layer woven, cotton-free, oil-proof and heat-resistant up to +200 °C. The gloves are non-flammable and can guarantee heat insulation when wet. They are certified according to DIN EN 388 for mechanical effects and DIN EN 407 for thermal effects. The order code GLOVE-PRO-TEMP is heat-resistant up to +250 °C, and extremely shear-resistant. If high temperature resistance, burr and edge scratch resistance are the main requirements, the extremely shear-resistant glove GLOVE-PRO-CUT can meet the demand. They are multi-layered weave, cotton-free, oil-proof and heat-resistant up to +250 °C. The gloves are non-flammable and can guarantee heat insulation when wet. They are certified according to DIN EN 388 for mechanical effects and DIN EN 407 for thermal effects. Order code GLOVE-PRO-CUT installation paste installation paste, please refer to the table for details, it is conducive to the sliding of the bearing ring, and can prevent stick-slip effect, strain, abrasion and friction corrosion. At the same time, it also has an anti-corrosion effect. The permissible operating temperature is between 30 °C and +150 °C. The installation paste can also prevent the erosion of water, water vapor, and various alkaline or acidic substances. Installation paste anti-rust oil Anti-rust oil is used to protect unpackaged bearings. It also provides long-term rust protection for metal surfaces such as equipment and machines stored indoors. It is usually not necessary to clean the anti-rust oil from the bearing. Because of its good compatibility, it can be mixed with all common bearing greases and lubricants. Anti-rust oil can be easily removed by alkaline solvents or neutral cleaners. Ordering example The 0.4 l spray can ordering code is ARCANOL-ANTICORROSIONOIL-400G.