HK Style Standard Needle Roller Bearings are commonly referred to as drawn cup needle bearings due to the shape of the bearing housing. Drawn cup needle roller bearings with open ends are needle roller bearings with a very small radial section height. They comprise thrust needle roller bearing, thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit. This needle roller bearing types use small, cylindrical rollers which are long and narrow. These bearings allow for a large surface area to be in contact with the outer race, and are much more compact than cylindrical rollers.

Its main features are low cross-section height and high load carrying capacity. Mainly used for bearing arrangements that are compact, inexpensive, and the bore of the bearing housing cannot be used as the raceway for the needle roller cage assembly. The bearing and bearing housing must be installed in an interference fit. If the axial positioning function such as the box shoulder and the stop ring can be omitted, the inner hole of the bearing housing can be made extremely simple and economical. The drawn cup needle roller bearings mounted on the shaft end are open on both sides and closed on one side. The base end face of the closed stamped outer ring can withstand small axial guiding forces.

JnSn needle roller bearing manufacturer have a high capacity for load carrying. They can also operate at high speeds with slim designs that allow use with limited radial space. Our HK Style needle roller bearings are available with or without an outer ring, and drawn cup needle roller bearings generally do not have an inner ring. The drawn cup style provides high load capacity along with large grease reservoirs.

The under rollers are available in various diameters, and the hk bearings are capable of a range of dynamic and static loads. Bearings are also available with seals in inch or metric measurements.

Application of hk bearing

Needle roller bearings standard are suitable for the automotive industry parts such as rocker arm pivots, compressors, transmissions, and drive shafts.