Joint bearing Self-lubricating Radial Joint Bearing GE...C is a special structure of the sliding bearing. It’s simple structure than the rolling bearing, the main outside by a sphere within a spherical inner and outer ring composition, can withstand a greater load. Based on their different types and structure, the GE---C series bearing can bear radial load, axial to load or radial, axial joint load simultaneously. 

Joint bearings are generally used for slower swing movement (ie, angular motion), the sliding surface for the spherical shape, the range can also be tilted a certain angle movement (ie, aligning movement), in the shell hole with the axis of support shaft misalignment Large degree, still work properly.

Radial spherical plain bearings have an inner ring with a sphere convex outside diameter and an outer ring with a correspondingly sphere but concave inside surface. Their design makes them particularly suitable for bearing arrangements where alignment movements between shaft and housing have to be accommodated, or where oscillating or recurrent tilting or slewing movements must be possible at relatively slow sliding speeds, often accompanied with heavy loads.

The maintenance-free spherical plain radial bearing GE...C type without seals is suitable for loads where low friction is needed. It has a sliding contact surface combination hard chrome/PTFE. 

Application

Radial Spherical Plain Bearings are widely used in hydraulic engineering, metal forming machine, construction machinery, automation equipment, automotive shock absorber, water machinery etc.