Single row angular contact ball bearings can accommodate axial loads acting in one direction only. A single row bearing is typically adjusted against a second bearing. The bearings 7200 series are non-separable and the bearing rings have one high and one low shoulder. The low shoulder enables a large number of balls to be incorporated in the bearing, giving it a relatively high load carrying capacity. The bearings are designed as standard with three contact angle indications. The most common versions have a contact angle of 40 °(symbol B). Larger bearings usually have contact angles of 25 °(symbol AC) or 30 °(symbol A).

The 7200 series contains single-row angular contact bearings with a counterbored outer ring. Bore sizes range from 10 mm to 320 mm, and most of these bearings are available with a pressed steel cage, or a machined synthetic resin cage, molded polyamide resin cage or solid bronze cage. 7200 series angular contact ball bearings can be used with moderate to heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.

Application

The angular contact ball bearings are commonly used in gearboxes, general equipment, wheel hubs, pumps agricutlure, marine etc.