The rod end bearing GAR..DO series owns male thread in the rod body, it corresponds with female series GIR...DO, and both of them are three-piece standard rod end bearings, which offer the best formed ball-to-race conformity and moderate strength.

The rod body of the GAR...DO series is with external right-hand male thread, and it requires for the maintenance. This unit consists of a radial spherical plain bearing GE...DO or GE...DO. 2RS and rod body. For the surface of the rod body, it’s zinc plated with a lubrication hole or grease nipple, but there’s no lubrication grooves and holes in the model which bore size is less than 15mm.

Rod ends GAR...DO series requiring maintenance and hydraulic rod ends incorporate spherical plain bearings with a steel/steel sliding contact surface. Rod ends requiring maintenance can support radial forces in a tensile or compressive direction and can transmit motions and forces with low moment levels. They are particularly suitable for alternating radial loads and, in certain circumstances, for unilateral loads.

Application

The rod end bearings are generally used in agricultural machinery, textile machinery, mining machinery, chemical processing, printing machinery, nose and main landing gears, engine mounts, flight control surfaces and doors and various conveying and rolling devices etc.