Are domestic bearings really inferior to imported bearings? 37 years of domestic bearing manufacturers tell you!

Are domestic bearings really inferior to imported bearings? Are Chinese-made products really inferior to foreign products? Many people have this misunderstanding, thinking that domestic bearings are inferior to imported bearings, so what makes them have such a misunderstanding? It can be roughly summed up as follows: 1. Many customers feel that domestic bearings are unstable; it is common that the matching solution is not perfect, many manufacturers cannot provide a reasonable matching solution for the analysis of application scenarios, and some customers cannot implement the matching solution. , resulting in the inability to match the use of the bearing, which will cause the bearing to be unstable when used, so that many customers misunderstand that the stability of the domestic bearing is not enough; 2. The parts processing of some domestic bearing manufacturers have a large contrast; the quality of the spindle bearings of different batches Uneven, poor quality bearings are mixed with good quality bearings, which are difficult to distinguish with naked eyes or random inspection, resulting in problems such as loud noise, short life and serious wear during operation; 3. The brand of imported bearings is relatively influential; The brand influence of imported bearings is relatively large, and buyers will feel that there is no need to take responsibility for using imported bearings. If there is a problem with domestic bearings, they will be blamed by the bosses, and they will blame all the reasons for the problem of domestic bearings. As a result, the bosses will feel that the quality of domestic bearings is not good; 4. Many domestic bearing manufacturers only care about cost reduction; some domestic bearing manufacturers ignore the guarantee of products in order to attract customers with low prices, and use the products of niche brands of steel mills. The impurity content of steel is often too high, or the bearing channel is peeled off, but the number of occurrences is not large, so everyone is lucky, but once an accident occurs, the consequences are more serious. 5. Some domestic bearing manufacturers choose cheap heat treatment suppliers; if the heat treatment is not done well, the internal organization of the bearing will be uneven or cause overheating problems, and these problems cannot be seen by the naked eye, and these problems will make the bearing use. Damaged prematurely in the process. The steel manufacturers we use are first-line brands. We firmly believe that good products must have good raw materials. We strictly control the quality of bearings and do not rely on lowering to attract customers. We believe that only good quality can stand the test. Licheng, Lixin, Liyan, and forge ahead with the mission of building our brand into an international brand!