Bearings are precision parts, so they must be very cautious when using them, that is, high-performance thrust ball bearings are used. If they are used improperly, the expected performance results will not be achieved, and the bearings are easy to use. damage. It is recommended to pay attention to the following matters when using bearings:

In general grease lubrication, do not clean the bearings and fill them with grease directly. In oil lubrication, it is generally not necessary to clean, but for instrument or high-speed bearings, clean oil should be used to remove the anti-rust agent coated on the bearings. Bearings with anti-rust agent removed are easy to rust, so they cannot be placed randomly.

1. When using and installing, be careful not to allow strong punching, directly hit the bearing with a hammer, and not allow pressure to pass through the rolling elements.

2. Use appropriate and accurate installation tools as much as possible to use special tools, and try to avoid the use of cloth and short fibers.

3. Prevent the corrosion of the bearing. When directly picking up the bearing by hand, wash away the sweat from your hands and apply high-quality mineral oil before proceeding. Pay special attention to rust prevention in the rainy season and summer. .

Four. Keep the bearing and its surrounding environment clean, even if the invisible smile dust enters the thrust ball bearing, it will increase the wear, vibration and noise of the bearing.