Accessories to assist in the storage, transport and installation of rolling bearings

Special accessories are used to assist in the storage, transport and installation of FAG rolling bearings. Handling and Mounting Tool The handling and mounting tool BEARING-MATE, see table for details, is an easy-to-handle accessory for medium or large rolling bearings. It is also used where the bearing is heated and ready for installation. This tool has two handles and two steel straps. The steel band is tightly clamped to the outer ring of the bearing. The kit also includes 2 splints. They prevent tilting of the inner ring when handling spherical roller bearings and self-aligning ball bearings. The tools and bearings can be carried by two people or by a crane. If by crane, the bearing can be lifted by 2 slings and can be rotated to any desired position. During the heating process, the carrier tool remains mounted on the bearing. It expands to the same extent as the bearing. This tool can be used for bearings weighing up to 500 kg and operating temperatures up to +160 C. Tool ordering example Tool for handling and mounting bearings from 250 mm to 450 mm outside diameter, using 2 short cleats and a pair of gloves ) can prevent the tilting of the inner ring of the spherical roller bearing Order code BEARING-MATE-LOCKBAR270 accessory, 2 straps, 1 m long Order code BEARING-MATE.SLING-1M accessory, spare accessory kit Spare accessory kit Order code BEARING- MATE.SERVICE-KIT Gloves FAG Insulation Gloves are ideal for use during installation and removal of heated bearings or other heated parts. This glove is shear resistant and durable. Heat resistant up to +150 C The insulated gloves GLOVE-PRO are heat resistant up to +150 C. The order code GLOVE-PRO has a heat resistance temperature of +200 C. If high temperature resistance is the main requirement, the heat insulating gloves GLOVE-PRO-TEMP can meet the requirements. They are multi-layered, cotton free, oil resistant and heat resistant up to +200 C. The gloves are non-flammable and remain insulated when wet. They are certified to DIN EN 388 for mechanical effects and DIN EN 407 for thermal effects. The order code GLOVE-PRO-TEMP is heat resistant up to +250 C and extremely shear resistant. If high temperature resistance and resistance to burrs and edge scratches are the main requirements, the extremely shear resistant gloves GLOVE-PRO-CUT can meet the requirements. They are multi-layered, cotton free, oil resistant and heat resistant up to +250 C. The gloves are non-flammable and remain insulated when wet. They are certified to DIN EN 388 for mechanical effects and DIN EN 407 for thermal effects. Ordering code GLOVE-PRO-CUT Mounting paste Mounting paste, see table for details, facilitates the sliding of bearing rings and prevents stick-slip effects, strain, wear and frictional corrosion. It also has anti-corrosion properties. The permissible operating temperature is between 30 C and +150 C. The installation paste can also prevent the erosion of water, water vapor and various alkaline or acidic substances. Mounting paste anti-rust oil Anti-rust oil is used to protect unpackaged bearings. It also provides long-term rust protection for metal surfaces such as equipment and machinery stored indoors. Usually it is not necessary to wash the anti-rust oil from the bearing. Because of its good compatibility, it can be mixed with all NSK general purpose bearing greases and oils. Antirust oils can be easily removed by alkaline solvents or neutral cleaners. Ordering example Ordering code ARCANOL-ANTICORROSIONOIL-400G for an aerosol can of 0.4 l.