Wholesale Deep Groove Ball Bearing Inch Rms Series Manufacturer

Send your inquiry

Inch RMS ball bearings are radial deep groove ball bearings with imperial dimensions, and they can withstand greater radial and thrust loads.Inch size bearings are available with open, metal shields, rubber seals.

Imperial ball bearings of this medium series in inch-dimensions offer a balanced ratio between their radial load carrying capacity, the required installation space, their weight and the admissible speed. They have a considerably higher load carrying capacity than deep groove ball bearings of the R series and are versatile.

Inch series RMS deep groove ball bearings have the same deep raceway grooves and close conformity between raceways and balls as the corresponding metric deep groove ball bearings, they are non-separable and require little attention or maintenance in service. They can carry axial loads acting in both directions in addition to radial loads, even at high speeds. And this range has a 'Light Series' denoted by RLS and a 'Medium Series' denoted by RMS.

Application of Inch size bearings

The wholesale deep groove ball bearing series is widely used in home appliances, low noise and high speed electric motors, automotive components, pumps, fitness equipment, telecommunication equipment, machinery etc.Contact us for wholesale deep groove ball bearings.

Bearing Model	Seals Type	Dimensions(mm)						Basic Load Rating(N)		Speed ratings(r/min)		Weight(kg)
Bearing Model	Seals Type	d		D		B		Dyn.C	Stat.Co	Grease	Oil	Weight(kg)
RMS4	Open,ZZ,2RS	12.700	1/2	41.275	1.625	15.875	5/8	12100	5100	18500	25000	0.100
RMS5	Open,ZZ,2RS	15.875	5/8	46.038	1.8125	15.875	5/8	12600	5600	16500	22000	0.110
RMS6	Open,ZZ,2RS	19.050	3/4	50.800	2	17.462	11/16	16500	7850	14700	20000	0.163
RMS7	Open,ZZ,2RS	22.225	7/8	57.150	2.25	17.462	11/16	19200	9400	13300	18000	0.204
RMS8	Open,ZZ,2RS	25.400	1	63.500	2.5	19.050	3/4	22100	11000	12200	16500	0.258
RMS9	Open,ZZ,2RS	28.575	1.125	71.438	2.8125	20.638	13/16	30800	16600	10800	14500	0.390
RMS10	Open,ZZ,2RS	31.750	1.25	79.375	3.125	22.225	7/8	37700	19600	9800	13200	0.470
RMS11	Open,ZZ,2RS	34.925	1.375	88.900	3.5	22.225	7/8	45300	24000	8800	11900	0.610
RMS12	Open,ZZ,2RS	38.100	1.5	95.250	3.75	23.812	15/16	49500	26700	8200	11000	0.770
RMS13	Open,ZZ,2RS	41.275	1.625	101.600	4	23.812	15/16	55000	32000	7700	10300	0.900
RMS14	Open,ZZ,2RS	44.450	1.75	107.950	4.25	26.988	1-1/16	59500	34700	7100	9600	1.040
RMS15	Open,ZZ,2RS	47.625	1.875	114.300	4.5	26.988	1-1/16	69000	41000	6600	8900	1.220
RMS16	Open,ZZ,2RS	50.800	2	114.300	4.5	26.988	1-1/16	69000	41000	6600	8900	1.210

Deep Groove Ball Bearing Inch RMS20 ZZ 2RS Open Size 63.5 x 139.7 x 31.75 mm

Deep Groove Ball Bearing Inch RMS Series