Odm Full Complement Miniature Deep Groove Ball Bearing Bl

Send your inquiry

Full complement ball bearings BL series are ball-fitted bearings, which capitalise on the space usually occupied by the ball retainer, as removing the retainer enables additional balls to be fitted. This increase in ball complement allows for significant increases in bearing capacity in either axial or radial directions, but relatively bearing operates at low speed.

The filler notch is ground into the ring so a dam is produced at the point of entry to the raceway. The dam, found on both rings, is calculated so that with the smallest ball and the maximum radial play, interference is maintained. After fitting the standard deep groove complement the notches are aligned and the balls pressed over the dams into the raceway.

The filler notch design bearing is primarily for use in applications where radial loads are dominant and the increased ball complements allow higher loads to be supported than in a standard caged deep groove bearing. Due to the introduction of a notch into each race on the same side, the filler notch design can be limited in its ability to carry axial load. For specific designs and applications the notch geometry can be optimised to carry an increased axial load in either one or both directions.

Application

The deep groove ball bearings are commonly used in automotive, wheels, electric motors, tools, appliances, transmissions, generators, conveyors and power tools.

Bearing Model	Seals Type	Dimensions(mm)			Basic Load Rating(N)		Weight(Kg)
Bearing Model	Seals Type	d	D	B	Dyn.C	Stat.Co	Weight(Kg)
BL205	Open,ZZ,2RS	25	52	15	3820	2360	0.133
BL305	Open,ZZ,2RS	25	62	17	5720	3470	0.246
BL206	Open,ZZ,2RS	30	62	16	5590	3670	0.215
BL306	Open,ZZ,2RS	30	72	19	7410	4650	0.364
BL207	Open,ZZ,2RS	35	72	17	7380	4970	0.307
BL307	Open,ZZ,2RS	35	80	21	9850	6540	0.486
BL208	Open,ZZ,2RS	40	80	18	9380	6480	0.394
BL308	Open,ZZ,2RS	40	90	23	12300	8040	0.685
BL209	Open,ZZ,2RS	45	85	19	9900	7140	0.449
BL309	Open,ZZ,2RS	45	100	25	14700	9910	0.883
BL210	Open,ZZ,2RS	50	90	20	10300	7830	0.504
BL310	Open,ZZ,2RS	50	110	27	17200	11800	1.16
BL211	Open,ZZ,2RS	55	100	21	12800	9880	0.667
BL311	Open,ZZ,2RS	55	120	29	19900	13800	1.49
BL212	Open,ZZ,2RS	60	110	22	15500	12200	0.856
BL312	Open,ZZ,2RS	60	130	31	22700	16100	1.88
BL213	Open,ZZ,2RS	65	120	23	16900	13500	1.09
BL313	Open,ZZ,2RS	65	140	33	27300	20200	2.36
BL214	Open,ZZ,2RS	70	125	24	18300	14900	1.19
BL314	Open,ZZ,2RS	70	150	35	30700	23000	2.87
BL215	Open,ZZ,2RS	75	130	25	19100	16100	1.29
BL315	Open,ZZ,2RS	75	160	37	33400	26000	3.43
BL216	Open,ZZ,2RS	80	140	26	22400	19100	1.61
BL316	Open,ZZ,2RS	80	170	39	36200	29200	4.08

Full Complement Miniature Deep Groove Ball Bearing BL310 ZZ 2RS Open Size 50x110x27 mm

Full Complement Miniature Deep Groove Ball Bearing BL210 ZZ 2RS Open Size 50x90x20 mm

Full Complement Miniature Deep Groove Ball Bearing BL309 ZZ 2RS Open Size 45x100x25 mm

Full Complement Miniature Deep Groove Ball Bearing BL209 ZZ 2RS Open Size 45x85x19 mm

Full Complement Miniature Deep Groove Ball Bearing BL308 ZZ 2RS Open Size 40x90x23 mm

Full Complement Miniature Deep Groove Ball Bearing BL208 ZZ 2RS Open Size 40x80x18 mm

Full Complement Miniature Deep Groove Ball Bearing BL307 ZZ 2RS Open Size 35x80x21 mm

Full Complement Miniature Deep Groove Ball Bearing BL207 ZZ 2RS Open Size 35x72x17 mm

Full Complement Miniature Deep Groove Ball Bearing BL306 ZZ 2RS Open Size 30x72x19 mm

Full Complement Miniature Deep Groove Ball Bearing BL206 ZZ 2RS Open Size 30x62x16 mm

Full Complement Miniature Deep Groove Ball Bearing BL305 ZZ 2RS Open Size 25x62x17 mm

Full Complement Miniature Deep Groove Ball Bearing BL205 ZZ 2RS Open Size 25x52x15 mm

Full Complement Miniature Deep Groove Ball Bearing BL Series