Fixing method of inner ring of fac bearing:

fag bearing has inner ring and outer ring. Interference achieves axial fixation. Suitable for support structures with fixed ends. Simple structure and small size. 2. The elastic retaining ring of the fag bearing is fixed The inner ring of the bearing is axially fixed by the shaft shoulder and the locking nut. Can bear small bidirectional axial load. Axial structure size is small. 3. The lock nut of the fag bearing is fixed The inner ring of the fag bearing is axially fixed by the shaft shoulder and the lock nut. And there is a stop washer to prevent loosening, safe and reliable, suitable for high-speed, heavy-duty occasions. 4. The end face thrust washer of the fag bearing is fixed, and the inner ring of the bearing is axially fixed by the shaft shoulder and the shaft end retaining ring. The shaft end retaining ring is screwed to the shaft end. Fixing screws should have anti-loosening devices. It is suitable for occasions where the shaft end is not suitable for cutting threads or the space is limited. 5. The fixing sleeve of the fag bearing relies on the radial dimension of the inner hole of the fixing sleeve to be compressed and clamped on the shaft to realize the axial fixation of the inner ring of the bearing. 6. The clamping method of the withdrawal sleeve of the fag bearing to fix the withdrawal sleeve is the same as that of the adapter sleeve. However, due to the special nut of the withdrawal sleeve, the bearing is easy to install and remove, and it is suitable for fixing the double row spherical bearing with a large radial load and a small axial load on the optical axis.