Installation and removal of imported bearings

With the acceleration of China's entry into the WTO, the coming of the Olympic Games and many other reasons, our economy has become a state of rapid growth. Bearing as the foundation of modern industry, in some high-precision industries, my country's demand for imported bearings such as (skf bearings, nsk bearings, ntn bearings, fag bearings, timken bearings) is promising. Therefore, in the process of use, the first thing to face is the installation and debugging of the bearing. Improper installation will cause immeasurable losses to customers. Here, Tianjin Boji Bearing Sales Co., Ltd. will help you analyze the commonly used installation methods of imported bearings. Prevent 16% of premature bearing failures About 16% of all premature bearing failures are caused by improper installation or the use of incorrect installation methods. Various applications may require mechanical, thermal or hydraulic mounting methods to install bearings correctly and efficiently. Choosing the right mounting method for your application will help you extend your bearing’s life and reduce the cost of premature bearing failure and potential damage to the application. Bearing cold installation Small and medium-sized bearings generally use cold installation. Traditionally, bearings were installed with a hammer and a piece of old pipe. This practice can cause external forces to be transmitted through the rolling elements, which can damage the raceways. SKF installation tools help prevent bearing damage by applying external force to the press-fitted bearing rings. Bearings are usually heated with an oil bath prior to hot mounting. However, this method can contaminate the bearing, causing premature bearing failure. Today, induction heating is the most common means of heating bearings because of its high control, efficiency and safety. The SKF Group sets the standard for the development of induction heaters for bearing applications. SKF bearing induction heaters have many features to help prevent bearing damage during heating. Mounting bearings with hydraulic technology SKF is a pioneer in the use of hydraulic technology in bearing mounting, including the SKF oil injection method and the SKF drive-in mounting method. These methods can help simplify bearing arrangements and facilitate correct and easy bearing installation. SKF has also developed a wide range of tools and equipment to put these hydraulic technologies into practice. Online Mounting and Dismounting Instructions SKF offers a unique online-service offering free information on mounting and dismounting SKF bearings and housings in eight languages. This information service provides step-by-step instructions for installation or removal. The system also provides information on selecting the correct tool and lubricant. With this free web service, SKF expertise is at your fingertips, anytime, anywhere.