Main aspects of regular maintenance and inspection of IKO full complement cylindrical roller bearings

Regular inspection of iko bearings is very important to maintain full complement cylindrical roller bearings in optimal condition, and can also reflect the discovery of problems. Matters needing attention and related knowledge about bearings in use. First of all, we want to stress that it is important to keep iko bearings lubricated and clean. Therefore, when we inspect the full complement cylindrical roller bearing, the surface of the bearing should be cleaned first, and then the parts around the bearing should be disassembled. Everyone should pay attention that the oil seal is a very fragile part, so you need to be extra careful during inspection and disassembly, and do not apply excessive force to avoid damage to the parts. Then carefully check the oil seal of the bearing and its surrounding parts. If it has shown bad symptoms, be sure to replace it. Bad oil seal will cause damage to the bearing, make the bearing cloudy and cause the equipment to stop. Second, we also check the lubricant of the iko bearing. Lubrication is important, not for full complement cylindrical roller bearings, but for all bearings. But please note that it is not advisable to add too much grease to the bearing. Cleaning of iko bearings: gasoline and kerosene are commonly used as common cleaning agents. When disassembling the bearing for maintenance, first record the appearance of the full complement cylindrical roller bearing, confirm the residual amount of lubricant, and then start to wash the bearing after sampling the lubricant for inspection. Cleaning is divided into coarse cleaning and fine cleaning, which are placed in the container respectively, and the bottom of the metal mesh pad is placed first, so that the bearing does not directly contact the dirt of the container. 1. For rough cleaning, use a brush to remove grease and adhesions. After it is roughly clean, transfer to fine cleaning. If the full complement cylindrical roller bearing is rotated with dirt, it will damage the rolling surface of the bearing, so be careful. 2. Fine and fine cleaning is to carefully clean the full complement cylindrical roller bearing while rotating in the cleaning oil. In addition, the cleaning oil should always be kept clean. Inspection and judgment of iko bearing: In order to judge whether the disassembled bearing can be used, it should be checked after the full complement cylindrical roller bearing is cleaned.

HangZhou Jnsn Bearing Imp& Exp Co., Ltd shows how effective market design can encourage participation, reduce gaming, and aggregate information, in order to improve liquidity, efficiency, and equity in markets.

HangZhou Jnsn Bearing Imp& Exp Co., Ltd is committed to attracting, developing, and keeping a diverse work force that reflects the nature of our global business.

CONTACT US can be great additions to companies looking to improve the well-being of their employees, as well as increase the efficiency and productivity of their workers across the organization.