Types of supplementary grease: There are various types of grease used in FYH rolling bearings with housings sold in the market, but sometimes different types of grease, especially different soap base greases mixed, will significantly reduce the lubricating performance. Therefore, the added grease should be the same as the initial filled grease, avoiding the use of different types of grease. The recommended supplementary grease for FYH rolling bearings with housings is the same as the initial filling grease. In addition, when using other grease as a last resort, it should be at least the same type (thickener) as the grease initially filled. Grease replenishment method: The grease replenishment of rolling bearings with seats is supplemented with grease nozzles and grease guns installed on the bearing box to replenish the grease of rolling bearings with seats. Clean the grease nozzles and their surroundings so that foreign objects will not Enter the inside of the bearing to clean the grease gun, fill it with clean grease and replenish the grease. When replenishing grease to the FYH rolling bearing with a seat, it is recommended to do it while turning the shaft by hand (or running the bearing with a seat at a low speed). In this way, the old lubricating grease can be properly removed, and the new lubricating grease can be evenly added to the inside of the bearing. In terms of mechanical structure, if it is difficult to replenish grease with the standard type (A type) grease nozzle, B type and C type grease nozzles are also available, please order. Types of grease nozzles. When oiling multiple rolling bearings with housings using a centralized oiling device, use soft grease with a consistency of 300 to 380, and proper piping must be performed in order to replenish the specified amount of grease correctly. For the piping of the rolling bearing with housing, use the threaded hole of the grease nozzle of the bearing box, but if the threaded hole of the bearing box and the thread of the piping are different, use a different diameter sleeve joint. The structure of the reducer casing joint for centralized oil supply. In addition, when performing centralized oil supply, determine a short interval for grease replenishment. If the replenishment amount is divided into several parts for replenishment, the bearing lubrication effect will be better. For more FYH information and inquiries, please search: .
HangZhou Jnsn Bearing Imp& Exp Co., Ltd's products comply fully with all compatible producing regulations.
JNSN Bearing has a whole range of different items to help you make an informed choice every time you make a purchase. Check it!
The Bearing Suppliers CONTACT US is also available as a Hrb Bearing China.
CONTACT US developed from HangZhou Jnsn Bearing Imp& Exp Co., Ltd’s unique skills in high technology has helped to produce CONTACT USBearing Suppliers.
HangZhou Jnsn Bearing Imp& Exp Co., Ltd constantly discovers the demands of global market for developing a wide range of products applied in different use.