What are the installation methods of angular contact ceramic ball bearings-

What are the installation methods of angular contact ceramic ball bearings? It can be roughly summarized as the following two types: Cold installation: bearing installation should be carried out in a dry and clean place as much as possible, and machines that generate metal debris and dust should be avoided. When it must be installed in a complex environment, it should minimize environmental pollution. When installing bearings, mechanical equipment, heating or hydraulic presses should be selected according to the type and specification. When installing a small bearing that is not too tight, you can pass a sleeve size and tap the sleeve size lightly to put the bearing in the appropriate position by hammering. When striking, it should act on the bearing throwing ring as evenly as possible to avoid skewing or tilting of the bearing. The vast majority of bearings are mounted using the press-in method. If you want to put the inner and outer rings of the bearing on the shaft and the bearing seat at the same time, you must ensure that the inner and outer rings work together with the same pressure, and must be on the same plane as the contact surface of the installation tool. Thermal mounting: In general, mounting of larger bearings is simply not possible without heating the bearing or housing, due to the accompanying size increase and the greater the force required for mounting. The temperature difference between the bearing throw ring and the shaft or housing required for hot mounting is entirely dependent on the amount of interference and the bore diameter where the bearings fit together. The heating temperature of open bearings should not exceed 120°C. It is not recommended to heat the bearings with hydraulic seals and seal covers to around 80°C (it should be ensured that the temperature does not exceed the permissible temperature of hydraulic seals and lubricating grease). When heating the bearing, it should be heated evenly, and there must be no local overheating. Only when the torque is accurate can the rotation be stable! This article is from Co., Ltd., a manufacturer of angular contact ceramic ball bearings for 37 years. Please indicate the source and link for reprinting (http:// )

HangZhou Jnsn Bearing Imp& Exp Co., Ltd devises a regular, independent, transparent and objective assessment mechanism to evaluate country performance.

The Global CONTACT US Leader. HangZhou Jnsn Bearing Imp& Exp Co., Ltd will build a unique portfolio of JNSN and related brands, striving to surpass our competitors in quality, innovation and value, and elevating our image to become the CONTACT US company most customer turn to worldwide.

There are so many factors that businesses have to weigh when producing CONTACT US, and we are not going to pretend to grasp all of them.

Natural has the distinct Hrb Bearing China which is irreplaceable.