Therefore, the transmission is reliable and stable, and the custom designed bearings capacity is large. It adopts computer training technology to train the gears, which greatly improves the bearing capacity of the reducer, is more resistant to impact, has low temperature rise, and has fewer failures and prolongs service life.

In recent years, the production scale of the domestic bearing industry has expanded rapidly, ranking fourth in the world. There are nearly 2,000 bearing companies, of which more than 900 companies have sales revenue of more than 5 million yuan, ranking first in the world.

There are two types of turbine bearings: thrust bearings and support bearings.

The front and rear wheel bearings of the car need to be maintained at least once every 2 years, but many people do not know how to maintain the front and rear bearings.

In the practical application of custom bearings, the problem of bearing heating is often encountered. How to deal with it?

Only open the custom bearing packaging just before installation. General grease lubrication, no cleaning, direct filling with grease. Lubricating oil does not need to be cleaned in general. However, instruments or high-speed bearings should be cleaned with clean oil to remove the rust inhibitor coated on the bearings. Bearings with rust inhibitor removed are prone to rust, so they cannot be left for too long.

Cooling water mainly plays multiple functions such as cooling, lubrication, cleaning, and rust prevention in best bearings processing.

Roller bearings may be damaged due to various reasons during operation, such as improper assembly, poor lubrication, moisture and foreign body intrusion, corrosion and overloading, etc., which may lead to premature bearing damage. Even if the installation, lubrication and maintenance are normal, after a period of operation, the jnsn bearing will experience fatigue spalling and wear and cannot work properly. The main failure forms and causes of rolling bearings are as follows:

For example, graphite has a stable layered structure and small bonding force between layers, so it is easy to slide, so the wholesale bearing friction factor is small; for example, the friction pair of diamond pairing is not easy to stick due to its high hardness and small actual contact area, and its friction factor is also high. smaller.